Kit includes stop, tail , turn signal lights, side marker lights ,rear and side reflex,2 x amber marker lights with reflex and 25-ft wiring harness with Hardware kits,license plate
Each kit have assembly and opearating Instructions for easy installing
Complies with DOT standards！
Designed For 12-Volt Systems and Under 80Inch width Towing vechicle
To replace bulbs,Just need to remove lens mounting screws
Bag of Hardware contains:6snap lock Connectors ,6 wire clips,6 wire nuts
Towing Vehicle Wiring:
Disconnect the vehicle battery to avoid short circuits and electrical shock.
Towing vehicle wiring.Attach the white wire to a grounded location on towing vehicle.
Connect the yellow wire to the driver's side stop and turn signal circuit with snap lock connector.
Connect the green wire to the passenger's side stop and turn signal circuit with snap lock connector.
Connect the brown wire to the tail lamp circuit with snap lock connector.standards！
Light kits are designed for trailers under 80 inches in width . Just Submersible ，Not water-proof ！